The S-5!® SnoClip™ is an aluminum add-on that helps retard the migration of snow and ice beneath the ColorGard® Bar. It has a special integrated rubber "foot" to prevent abrasion of the panel's finish. SnoClip™ slides onto the crossmember or rod and extends down to the flat of the roofing panel.
SnoClip™s are highly advised on seams of 2" (50 mm) and higher. They are recommended but not mandatory on seam heights of 1-3/4" (44.5mm) and lower.
They retard movement of snow and ice beneath the crossmember. SnoClip™ is not always an option as some metal roofing panels have minor ribs or striations that will not allow the SnoClip™ to function properly. SnoClip™s can be used on a striated panel but the results may vary.
SnoClip III™ has 3 locks and will work on seam heights of 1-3/4” (44.5 mm) up to 3-1/4” (82.55 mm) vertical seam.
Accessory Component to:
Job Specific snow retention layouts are available from Rocky Mountain Snow Guards, Inc. These are provided at no charge. Snow Guard Depot recommends obtaining a job specific layout for all snow retention projects. Without a job specific layout, Snow Guard Depot cannot guarantee that snow guards purchased will perform effectively. Snow retention layouts can be obtained by contacting Rocky Mountain Snow Guards here.