The S-5!® SnoClip™ is an aluminum add-on that helps retard the migration of snow and ice beneath the ColorGard® Bar. It has a special integrated rubber "foot" to prevent abrasion of the panel's finish. SnoClip™ slides onto the crossmember or rod and extends down to the flat of the roofing panel.
SnoClip™s are highly advised on seams of 2" (50 mm) and higher. They are recommended but not mandatory on seam heights of 1-3/4" and lower (45mm). They retard movement of snow and ice beneath the crossmember. SnoClip™ is not always an option as some metal roofing panels have minor ribs or striations that will not allow the SnoClip™ to function properly. SnoClip™s can be used on a striated panel but the results may vary.
SnoClip II™ has 2 locks and is especially made for seam heights of 1” (25 mm) and 1-3/4” (44.5 mm) snap.
Job Specific snow retention layouts are available from Rocky Mountain Snow Guards, Inc. These are provided at no charge. Snow Guard Depot recommends obtaining a job specific layout for all snow retention projects. Without a job specific layout, Snow Guard Depot cannot guarantee that snow guards purchased will perform effectively. Snow retention layouts can be obtained by contacting Rocky Mountain Snow Guards here, or calling 877.414.7606.